Xcite™ Light Airmix® Manual Spray Gun
- Excellent Airmix® finish quality
- High transfer efficiency - up to 86% (HVLP compliant)
- Designed to access recessed areas of parts
SAMES KREMLIN created Airmix® technology in 1975. Airmix® is an intermediate spray technology that combines the finish quality of Airspray with the productivity of Airless and is the industrial standard for Air-Assisted Airless today. The Xcite™ Light Airmix® manual spray gun benefits:
• Lightweight: 30% weight reduction without compromising the perfect gun balance
• Compact design for easy access to recessed areas and complex shaped parts
• Effortless trigger pull reduces muscle strain and carpal tunnel injuries
• Ready to spray concept: No fan adjustment; the fan width is pre-determined by the size of the tip installed on the gun.
Airmix® spraying technology is the best compromise between productivity and finish quality with the highest transfer efficiency up to 86%.
|Benefits per technologies||Transfer efficiency||Atomization quality||Flow rate|
The Xcite™ Light pressure spray gun can be fed by either an Airmix® lub cup or a Flowmax® paint pump. We offer several complete ready-to-paint packages.
|Designation||Value||Unit: metric (US)|
|Maximum Fluid Pressure||60 - 120 (870 - 1740)||bar (psi)|
|Maximum Air Pressure||6 (87)||bar (psi)|
|Recommended Air Pressure (min)||0.7 - 3 (11.6 - 43)||bar (psi)|
|Air Consumption||4.8 - 7.2 (2.8 - 4.2)||m3/h (cfm)|
|Maximum Fluid Temperature||50 (122)||°C (°F)|
|Air Inlet||M 1/4" NPS|
|Fluid Inlet||1/2" JIC (#5)|
|Trigger Lock Safety||♦|
|Polished Forged Aluminum Body||♦|
|Stainless Steel, PTFE, Carbide Wetted Parts||♦|
|Weight||385 (13.5)||g (oz)|
|Trigger effort||9.8 - 13.7 (2.2 - 3.1)||N (lbs)|
|Designation||Pressure bar (psi)||Aircap||Swivel fitting||Tip||Seat||Sales Area||Part number|
|XCITE™ LIGHT GUN 60||60 (870)||VX 124||-||TBD||ACETAL||Worldwide||135725020|
|XCITE™ LIGHT GUN 120||120 (1740)||VX 124||-||TBD||SST||Worldwide||135725120|
|GUN,XCITE LIGHT,60 BAR,C/W AIRCAP,TIP||60 (870)||VX 124||-||TBD||ACETAL||668725000|
|Designation||Adjustable fan pattern||Length||Internal ø||Max operating pressure||Fitting||Filter screen||Part number|
|WHIP END HOSE 120B 3/16" 1.6M SST FITTINGS||-||1.6 m (5 ft)||4.8 mm (3/16)||120 bar||1/2 JIC||050450854|
|WHIP END HOSE 120B 1/8" 1.6M SST FITTINGS||-||1.6 m (5 ft)||3.2 mm (1/8)||120 bar||1/2 JIC||050451051|
|VX124 AIRCAP WITH GUARD||No||132725055|
|INLINE FLUID FILTER||-||200 bar||MM 1/2 JIC||#6||155010000|
|Designation||Pressure bar (psi)||Aircap||Tip||Seat||Sales Area||Part number|
|Spraypack T/M 10C18 + Xcite™ Light + tip without filter||60 (870)||VX 124||06.094||ACETAL||Worldwide||151665820|
|Spraypack T/M 10C18 + Xcite™ Light + tip + inline filter||60 (870)||VX 124||06.094||ACETAL||Worldwide||151665810|
|Spraypack W/M 15C25 + Xcite™ Light + tip + filter||90 (1300)||VX 124||09.114||SST||Worldwide||151140600|
|Spraypack W/M 15C50 + Xcite™ Light + tip + filter||90 (1300)||VX 124||12.114||ACETAL||Worldwide||151143600|
|SYSTEM,10-C18,W/M,XCITE LGT 60B,5G,ERGO,09-114||60 (870)||VX 124||09-114||ACETAL||North America||668665950|
|SYSTEM,10-C18,W/M,XCITE LGT 60B,5G,ERGO,09-114,INLINE FTR||60 (870)||VX 124||09-114||ACETAL||North America||668665951|
|SYSTEM,10-C18,C/M,XCITE LGT 60B,5G,ERGO,09-114||60 (870)||VX 124||09-114||ACETAL||North America||668665952|
|SYSTEM,10-C18,C/M,XCITE LGT 60B,5G,ERGO,09-114,INLINE FTR||60 (870)||VX 124||09-114||ACETAL||North America||668665953|
|SYSTEM,10-C18,T/P,XCITE LGT 60B,1G,ERGO,09-114||60 (870)||VX 124||09-114||ACETAL||North America||668665954|
|SYSTEM,10-C18,T/P,XCITE LGT 60B,1G,ERGO,09-114,INLINE FTR||60 (870)||VX 124||09-114||ACETAL||North America||668665955|
|Designation||Sales Area||Part number|
|KIT,XCITE LIGHT TRIGGER ASSY||Worldwide||129725909|
|SERVICING KIT - REAR LINE,XCITE120B||Worldwide||129729910|
|SEAL,FRONT,XCITE SEAT,QTY 5||Worldwide||129729912|
|SPRING,XCITE GUN,120B,QTY 5||Worldwide||129729914|
|SERVICING KIT - REAR LINE,XCITE 60B||Worldwide||129729923|
|KIT,SEAL,AIR,XCITE LIGHT (GUN HEAD SEALS ONLY)||Worldwide||129729927|
Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.
Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.
Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.
Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.
Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.
Water-Based Wood Stains have all the advantages of oil-based stains. They spread easily, can be repaired, blend effortlessly & have plenty of open time. The thicker formula allows for controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine & Maple.
Chemical Agent Resistant Coating (CARC) is available in a water-based solution for environmental protection.
Chemical Agent Resistant Coating (CARC) is a paint commonly applied to military vehicles to provide protection against chemical & biological weapons. The surface of the paint is engineered to be easily decontaminated after exposure to chemical warfare & biological warfare agents. The paint is also resistant to damage & removal by decontaminating solutions.
Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.
Catalyzed polyurethane clear coats and paints are prized for their durability and versatility around the world. They are used on everything from wood cabinetry, mill work and furniture to planes, trains, and automobiles. They are usually mixed with isocyanates in the hardener. The isocyanate component of polyurethane reacts with moisture in the air and form a hard crystalline structure.
Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.
Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.
Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.
Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.
Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. The catalyst is moisture-sensitive and requires a Flowmax® technology protection.
Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. Curing times of AC products can be dramatically accelerated with heat application.