TRP 501 Automatic Electrostatic Spray Gun
- High paint savings
- Increased productivity
- Simplified maintenance
- Easy to use
Available with fan spray and super vortex spray (8 & 12 mm / .31 & .47 in)
|Designation||Value||Unit: metric (US)|
|Maximum Fluid Pressure||6 (87)||bar (psi)|
|Maximum Fluid Outlet||800 (27)||cc/min (oz/min)|
|Minimum Fluid Outlet||100 (3)||cc/min (oz/min)|
|Maximum Air Pressure||6 (87)||bar (psi)|
|Air Consumption||7 - 40 (4 - 23)||m3/h (cfm)|
|Transfer Efficiency||30 - 60||%|
|Weight||800 (28)||g (oz)|
|Trigger Air Pressure||5 (75)||bar (psi)|
|Designation||Spray type||Nozzle size||Part number|
|TRP set||Round Super vortex||12 mm (.472 in)||910014588|
|TRP set||Round Super vortex||8 mm (.315 in)||910014589|
|TRP 502 ( twin) High Voltage kit for water based paint||910014595|
|TRP 501 (single) High Voltage kit for water based paint||910014594|
|TRP 501 paint regulator for single gun||750016|
|TRP 502 (twin) High Voltage kit for solvent based paint||910014593|
|TRP 501 (single) High Voltage kit for solvent based paint||910014592|
|Measure 'test aircaps'||437257|
|TRP 500 nut for flat spray nozzle||745066|
|TRP 500 nut for round spray nozzle||749982|
|Designation||Spray type||Material||Nozzle size||Part number|
|TRP 500 aircap / nozzle||Flat||Stainless steel / brass||1.2 mm (.047 in)||428376|
|TRP 500 aircap / nozzle||Flat||Stainless steel / brass||1.5 mm (.059 in)||429063|
|TRP 500 complete nozzle / single circuit||Flat||Stainless steel||1.2 mm (.047 in)||428375|
|TRP 500 complete nozzle / single circuit||Flat||Stainless steel||1.5 mm (.059 in)||429064|
|TRP 500 nozzle injector / single circuit||Flat||Stainless steel||1.1 mm (.043 in)||730355|
|TRP 500 nozzle injector / single circuit||Flat||Stainless steel||1.2 mm (.047 in)||755287|
|TRP 500 nozzle injector / single circuit||Flat||Stainless steel||1.5 mm (.059 in)||439058|
|TRP 500 aircap||Flat standard||Plastic||-||436939|
|TRP 500 aircap||Flat wide pattern||Plastic||-||422513|
|TRP 500 aircap||Flat wide pattern||Brass||-||Contact us|
|TRP 500 nozzle / twin circuit||Flat||1.5 mm (.059 in)||752055|
|TRP 500 aircap||Round||Plastic||12 mm (.472 in)||430179|
|TRP 500 aircap||Round||Plastic||6 mm (.236 in)||430804|
|TRP 500 aircap||Round||Plastic||8 mm (.315 in)||430540|
|TRP 500 injector (by 5)||Round||12 mm (.472 in)||455236#|
|TRP 500 injector (by 5)||Round||6 mm (.236 in)||455234#|
|TRP 500 injector (by 5)||Round||8 mm (.315 in)||455235#|
|TRP 500 nozzle (Vortex) without injector||Round||-||752983|
|TRP 500 sparying head alone||Round||12 mm (.472 in)||752992|
|TRP 500 spraying head alone||Flat||-||752949|
|TRP 500 spraying head alone||Round||8 mm (.315 in)||752991|
Format : application/pdf
Size : 357Ko
Format : application/pdf
Size : 19Mo
Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.
Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.
Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.
Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.
Some anti-corrosion materials are available in water-based versions. These green paints have a longer dry time, but meet most environmental requirements & have excellent protective qualities.
Solvent-free epoxy coatings are designed for long-term protection of steel & concrete structures against corrosion, abrasion & chemical attack. Operating temperature ranges from –40F to 1040F.
Polyurethane coatings are often used for the corrosion protection of steel because they are particularly economical to apply. They dry quickly & can therefore be over-coated in short intervals. They can also be applied independently of the weather conditions & are resistant to impact.
Water-Based Wood Stains have all the advantages of oil-based stains. They spread easily, can be repaired, blend effortlessly & have plenty of open time. The thicker formula allows for controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine & Maple.
A wood stain consists of a colorant suspended or dissolved in an agent or solvent. Colored, or ''stained", finishes do not penetrate the pores of the wood to any significant degree.
Chemical Agent Resistant Coating (CARC) is available in a water-based solution for environmental protection.
UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.
Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.
Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.
The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.
Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.
A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.
Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.