S3 G HPA Manual Airspray Spray Gun Gravity
- Small to medium viscosity material
- Specific aircap for line fan: very precise touch-up work
- Improved ergonomics: light & compact body and small cup (0.25L)
|Designation||Value||Unit: metric (US)|
|Maximum Fluid Outlet||180 (6.3)||cc/min (oz/min)|
|Minimum Fluid Outlet||86 (3)||cc/min (oz/min)|
|Maximum Air Pressure||6 (87)||bar (psi)|
|Recommended Air Pressure (min)||3 (43.5)||bar (psi)|
|Air Consumption||9 (5.3)||m3/h (cfm)|
|Maximum Fluid Temperature||50 (122)||°C (°F)|
|Air Inlet||M 1/4" NPS|
|Polished Forged Aluminum Body||♦|
|Wetted Parts, Stainless Steel||♦|
|Weight||515 (18.2)||g (oz)|
|Designation||Max Fluid viscosity (CA 4)||Aircap||Nozzle size||Needle||Compatibility||Air Consumption||Fluid Output||Fan width at 20cm (8in)||Part number|
|PROJECTOR||14 - 20 s||AM||0.8 mm (0.031 in)||0.8||-||12.9 m3/h (7.6 cfm)||86 cc/mn (2.9 oz/mn)||15 cm (5.9 in)||1||031150008|
|PROJECTOR||20 - 30 s||AM||1.0 mm (0.039 in)||1.0||-||12.9 m3/h (7.6 cfm)||142 cc/mn (4.8 oz/mn)||22 cm (8.7 in)||2||031150009|
|PROJECTOR||30 - 40 s||AM||1.2 mm (0.047 in)||1.2||-||12.9 m3/h (7.6 cfm)||180 cc/mn (6.1 oz/mn)||24.5 cm (9.4 in)||3||031150010|
|PACKAGE OF SEALS S3 GUN||Pack of seals||1||129150901|
|SERVICING KIT S3 GUN||Maintenance pack (includes a pack of seals + gun components)||2||129150902|
|PLASTIC GRAVITY O25L CUP FOR J4-J5||Spare white 0.25L cup with strainer||3||139280200|
|0.25L GREY GRAVITY CUP||Spare grey 0.25L cup with strainer for PU and precatalysed fluids||4||139280250|
|5 NON-DROP PACKET||Pack of 5 non drop plugs||5||139270210|
|5 SCREENS PACKET FOR 0,6L CUP||Pack of 5 strainers to put in the cup||6||139270220|
Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.
Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.
Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.
Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.
Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.
Enamel paint air dries to a hard, typically glossy finish, and is used for coating surfaces that are outdoors or otherwise subject to hard wear or temperature changes.
Water-Based Wood Stains have all the advantages of oil-based stains. They spread easily, can be repaired, blend effortlessly & have plenty of open time. The thicker formula allows for controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine & Maple.
A wood stain consists of a colorant suspended or dissolved in an agent or solvent. Colored, or ''stained", finishes do not penetrate the pores of the wood to any significant degree.
Chemical Agent Resistant Coating (CARC) is available in a water-based solution for environmental protection.
Chemical Agent Resistant Coating (CARC) is a paint commonly applied to military vehicles to provide protection against chemical & biological weapons. The surface of the paint is engineered to be easily decontaminated after exposure to chemical warfare & biological warfare agents. The paint is also resistant to damage & removal by decontaminating solutions.
Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.
Catalyzed polyurethane clear coats and paints are prized for their durability and versatility around the world. They are used on everything from wood cabinetry, mill work and furniture to planes, trains, and automobiles. They are usually mixed with isocyanates in the hardener. The isocyanate component of polyurethane reacts with moisture in the air and form a hard crystalline structure.
Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.
Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.
Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.
Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.
Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. The catalyst is moisture-sensitive and requires a Flowmax® technology protection.
Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. Curing times of AC products can be dramatically accelerated with heat application.
The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.
Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.
A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.
Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.