Reverse Flush

Solution for optimizing the paint line rinsing system

Reverse flush is a block that dumps and rinses the material supply system without going through the sprayer.

Reverse flush comes in 2 versions:  Remote and Built-in.  It can be installed within all the paint unit configurations (depending on the distance betweem the pump and sprayer).

  • Remote Reverse Flush Block

When the pump is placed far away from the sprayer (distance > to 1.5 m) (as in the case of the Slim Arm which no pump can be assembled) then the remote reverse flush block is used (ideally placed at a distance between 1 and 1.5 m from the sprayer).

  • Built-in Reverse Flush Block

When the pump is placed close to the sprayer (distance < to 1.5 m) (as in the case of the Process Arm) then the reverse flush block is directly assembled onto the pump. The "built-in" reverse flush block is used. This configuration is optimal with a simple installation.

Quote request

Reverse Flush Ref. 910007340
Reverse flush block