PMP150 Airspray Diaphragm Paint Pump
|Designation||Value||Unit: metric (US)|
|Maximum Fluid Pressure||6 (87)||bar (psi)|
|Maximum Air Pressure||6 (87)||bar (psi)|
|Weight||5 (11)||kg (lbs)|
|Maximum Temperature||50 (122)||°C (°F)|
|Cylinder||100 (3.4)||cc (oz)|
|Sound Level||< 70||dBa|
|Fluid Output at 30 cycles/mn||3 (0.8)||l/min (gal/mn)|
|Free Flow Rate||19 (5)||l/mn (gal/mn)|
|Air Consumption at 30 Cycles/mn at 4 Bar (60 psi)||1.1 (0.6)||m³/h (cfm)|
|Air Inlet||F 3/8" BSP|
|Fluid Outlet||M 3/8" NPS|
|Fluid Inlet||M 18x125|
|Number of cycles per liter of products||10|
|Height||24 (9.4)||cm (in)|
|Width||36 (14.2)||cm (in)|
|Depth||26 (10.2)||cm (in)|
|Wetted parts PTFE, Polypropylene, stainless steel||♦|
|Designation||Setup||Air motor power regulator||Atomization air regulator||Air regulator fluid pressure||Suction rod||Drain rod Ø6x8||Pump output filter||Part number|
|PMP 150 BARE PUMP||Bare Pump||-||-||-||-||-||-||1||144931000|
|PMP 150 WALL-MOUNTED||Wall Mounted||♦||♦||♦||-||-||-||2||151759900|
|PMP 150 WALL-MOUNTED WITH SUCTION ROD||Wall Mounted||♦||♦||♦||♦||-||-||3||151753000|
|PMP 150 WALL-MOUNTED WITH FILTER||Wall Mounted||♦||♦||♦||♦||-||♦||4||151759100|
|PMP 150 SST WALL-MOUNTED||Wall Mounted with SST circulation||-||♦||♦||♦||-||-||5||151757000|
|PMP 150 CART-MOUNTED||On a cart||♦||♦||♦||♦||-||-||6||151754000|
|STAINLESS FITTING M 1/2 JIC F 3/8 NPS||SST Fitting F 3/8||1||050123306|
|COMPLETE SS CIRCULATION ASSEMBLY FOR PMP 150||Kit to upgrade the pump to a stainless steel circulation||3||151757010|
|KIT SST SUCCION ROD D.16 W/CONNECTOR 18X125 + STRAINER||SST Suction rod with Ø16 hose, strainer and fitting 18x125||4||049596010|
|PMP 150 WALL MOUNTED BRACKET||Bracket to mount the pump on a wall||5||051751030|
|ENS GRAVITY CUP WITH SUPPORT FOR PMP 150 PRATIK||2L paint cup with support to mount on the tripod||8||151758100|
|Designation||Gun||Projector||Paint hoses||Pump||Part number|
|KIT PMP150 W/M WITH CIRCULATION + KIT M22 15 EN 3||M22 P HPA||15 EN 3||Ø7 - Length: 7.5m||PMP150 Wall Mounted with SST circulation||151249050|
|KIT PMP150 PRATIK WITH KIT M22 15 EN 3 AND GRAVITY CUP||M22 P HPA||15 EN 3||Ø7 - Length: 7.5m||PMP150 on a tripod||151249060|
|KIT PMP150 WM WITH CIRCULATION + KIT M22 E 3 K HVLP||M22 P HVLP||09 E3 K HVLP||Ø7 - Length: 7.5m||PMP150 Wall Mounted with SST circulation||151249090|
|KIT PMP 150 PRATIK WITH CUP + KIT M22 9 E3 K HVLP||M22 P HVLP||09 E3 K HVLP||Ø7 - Length: 7.5m||PMP150 on a tripod||151249100|
|PACKAGE OF SEALS FOR AIR MOTOR PMP 150 PUMP _1.175 PUMP||Seal kit for the air motor||1||144931091|
|GRAVITY CUP||2L paint cup without support to put on the tripod||2||151662355|
|SET OF SEALS TEFLON PRODUCT.||Seal kit for the fluid section in Teflon||3||144931092|
|PACKAGE OF SEALS FOR FLUID SECTION PMP 150 PUMP||Seal kit for the fluid section in EPDM||4||144931095|
|PACKAGE OF SEALS FOR FLUID SECTION PMP 150 PUMP (VITON)||Seal kit for the fluid section in Viton (FPM)||5||144931096|
Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.
Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.
Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.
Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.
Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.
Enamel paint air dries to a hard, typically glossy finish, and is used for coating surfaces that are outdoors or otherwise subject to hard wear or temperature changes.
Catalyzed polyurethane clear coats and paints are prized for their durability and versatility around the world. They are used on everything from wood cabinetry, mill work and furniture to planes, trains, and automobiles. They are usually mixed with isocyanates in the hardener. The isocyanate component of polyurethane reacts with moisture in the air and form a hard crystalline structure.
UV-resistant epoxy systems mixed with hardener cure faster & in moist conditions.
UV coatings can be formulated up to 100% solids so that they have no volatile component that contributes to pollution.
Water-based UV coatings can be considered aesthetically equivalent to bi-component acrylic & polyurethane solvent-based coatings. The range is composed of both pigmented & transparent products.
UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.
The UV polyurethane multi-components are especially designed for very strong UV stability. Mixing with hardener gives very high durability & UV resistance.
The UV polyurethanes are especially designed for UV stability, The coating is long lasting, offers excellent substrate protection, provides an attractive finish & is user-friendly.
Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.
Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.
Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.
Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.
Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. The catalyst is moisture-sensitive and requires a Flowmax® technology protection.
Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. Curing times of AC products can be dramatically accelerated with heat application.
The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.
Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.
A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.
Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.
Auto Color Low Pressure Automatic Color Change System is an automated paint/stain dispense system available for 4 through 19 color versions.
This solution is a simple concept supplying water-based paint to one painter with additional electrostatic effect.
This solution is a simple AIRSPRAY concept using our ISOCUBE for spraying water-based paint with an additional electrostatic effect
This solution is a simple concept supplying solvent-based paint to one painter with electrostatic effect.
This solution is a simple concept supplying paints & flushing solvent to one or several manual guns.