40C100 Airless Paint Pump
- Ideal for Airless applications
- High efficiency pump for maximum energy savings
- Optimized construction - simple & quick maintenance
|Designation||Value||Unit: metric (US)|
|Maximum Fluid Pressure||240 (3480)||bar (psi)|
|Maximum Air Pressure||6 (87)||bar (psi)|
|Air Consumption||43.2 (25.4)||m³/h (cfm)|
|Weight||22 (48.5)||kg (lbs)|
|Maximum Temperature||60 (140)||°C (°F)|
|Fluid Output at 30 cycles/mn||3 (0.8)||l/min (gal/mn)|
|Air Consumption at 30 Cycles/mn at 4 Bar (60 psi)||43.2 (25.4)||m³/h (cfm)|
|Air Inlet||F 3/4" BSP|
|Fluid Outlet||M 1/2" JIC|
|Fluid Inlet||M 26 x 125|
|Hard Chrome Stainless Steel, Wetted Parts||•|
|Designation||Version||Fluid inlet||Suction rod||Drain rod||Paint filter||Air regulator||Seal||Part number|
|40C100||-||M 26x125||-||-||-||0||Polyfluid, PTFE G + GT||151785000|
|AIRLESS 40-C100 WALL MOUNTED PUMP W/0 FILTER HOSES W/0 GUN||Wall Mounted||M 26x125||♦||-||♦||0||Polyfluid, PTFE G + GT||151785100|
|40C100||Wall Mounted||M 26x125||♦||♦||♦||1||Polyfluid, PTFE G + GT||151785200|
|40C100||Mobile||M 26x125||♦||♦||♦||1||Polyfluid, PTFE G + GT||151785400|
|AIRLESS 40-C100 WALL MOUNTED AIRLESS PUMP W/O FILTER W/O SUCT||Wall Mounted||M 26x125||-||-||♦||0||Polyfluid, PTFE G + GT||151785050|
|AIRLESS 40-C100 WALL MOUNTED AIRLESS PUMP W/O FILTER W/O SUCT||Wall Mounted||M 26x125||-||♦||♦||1||Polyfluid, PTFE G + GT||151785150|
|DRAIN ROD D16 S/S CONNECTOR 18X125||049596000|
|TROLLEY 2 ARMS||051221000|
|BRACKET W. STRAPS||056100199|
|SUCTION ROD DIAM 25 (FITTINGS 26*125) FOR PUMP||149596150|
|SCUTION ROD D25 (FITTINGS 26x125) FOR 200 L DRUM||149596160|
|EQUIPPED FILTER 3/8 O'RING SEAL W.SCREEN 12||155580400|
|PACK 40C100 CART FILT SUCT D25 DRAIN SFLOW 275 517 TIP HOSES||151265205|
|SET OF GT SEALS FOR HYDRAULIC C100 GT||144960091|
|SERVICING KIT FOR HYDRAULIC C100 GT||144960096|
|PACKAGE OF SEALS FOR 2000/4 AIR MOTOR||146270990|
|SERVICING KIT FOR MOTOR 2000-4||146270996|
|PACKAGE OF SEALS FOR FLUID SECTION C100 CHEVRON||144960090|
|SERVICING KIT FOR HYD C100 CHEVRON||144960095|
Format : application/pdf
Size : 520Ko
Format : application/pdf
Size : 3Mo
Format : application/pdf
Size : 6Mo
Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.
Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.
Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.
Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.
Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.
Some anti-corrosion materials are available in water-based versions. These green paints have a longer dry time, but meet most environmental requirements & have excellent protective qualities.
The Anti-Corrosion Epoxy Multi-Component product is highly resistant to marine & industrial environments, buried conditions, ground water, effluents, salt water & a wide range of oils & chemicals.
Solvent-free epoxy coatings are designed for long-term protection of steel & concrete structures against corrosion, abrasion & chemical attack. Operating temperature ranges from –40F to 1040F.
A two-component efficient coating product, used as first layer on metallic surfaces & in a wide range of painting systems. Forms an excellent quality anti-corrosive polyurethane film, ensuring the adherence between the surface & the next layer of the painting process.
Anti-Corrosion Epoxy is applied for active anti-corrosive & anti-rust protection of iron & steel surfaces that are to be coated. It is extremely hard & resistant to friction. It is particularly resistant to diluted acids, alkalis, petroleum products, some solvents, water, sea water, and more.
Used for the steel structures of steel pipeline, steel frame, bridge & plant facilities for effective, long-term substrate protection.
Polyurethane coatings are often used for the corrosion protection of steel because they are particularly economical to apply. They dry quickly & can therefore be over-coated in short intervals. They can also be applied independently of the weather conditions & are resistant to impact.
Chemical Agent Resistant Coating (CARC) is available in a water-based solution for environmental protection.
Chemical Agent Resistant Coating (CARC) is a paint commonly applied to military vehicles to provide protection against chemical & biological weapons. The surface of the paint is engineered to be easily decontaminated after exposure to chemical warfare & biological warfare agents. The paint is also resistant to damage & removal by decontaminating solutions.
Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.
UV-resistant epoxy systems mixed with hardener cure faster & in moist conditions.
UV coatings can be formulated up to 100% solids so that they have no volatile component that contributes to pollution.
Water-based UV coatings can be considered aesthetically equivalent to bi-component acrylic & polyurethane solvent-based coatings. The range is composed of both pigmented & transparent products.
UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.
The UV polyurethane multi-components are especially designed for very strong UV stability. Mixing with hardener gives very high durability & UV resistance.
The UV polyurethanes are especially designed for UV stability, The coating is long lasting, offers excellent substrate protection, provides an attractive finish & is user-friendly.
Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.
Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.
Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.
Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.
This advanced solution is delivering paint & solvent to two guns mounted on reciprocator machine.
This advanced solution is delivering freshly mixed two component paint to automatic gun mounted on flatline machine.
This solution is an advanced concept supplying freshly mixed two-components paint & flushing solvent to one or several manual guns.
This solution is a simple concept supplying paint to one painter.