|Designation||Value||Unit: metric (US)|
|Maximum Fluid Pressure||200 (2900)||bar (psi)|
|Maximum Air Pressure||6 (87)||bar (psi)|
|Air Consumption||22 (13)||m³/h (cfm)|
|Weight||26.5 (58.4)||kg (lbs)|
|Maximum Temperature||50 (122)||°C (°F)|
|Cylinder||60 (2)||cc (oz)|
|Fluid Output at 30 cycles/mn||1.8 (.048)||l/min (gal/mn)|
|Air Inlet||F 3/4" BSP|
|Fluid Outlet||M 1/2 JIC|
|Fluid Inlet||M 26 x125|
|Designation||Version||Fluid inlet||Section rod||Drain rod||Paint filter||Air regulator||Seal||Part number|
|34F60||Wall||M 26x125||25 mm (1'')||♦||♦||2||GT + GT||151740700|
|34F60||Troley||M 26x125||25 mm (1'')||♦||♦||2||GT + GT||151740750|
|DRAIN ROD D16 S/S CONNECTOR 18X125||049596000|
|TROLLEY 2 ARMS||051221000|
|TROLLEY 1 ARM||051730110|
|BRACKET W. STRAPS||056100199|
|SUCTION ROD DIAM 25 (FITTINGS 26*125) FOR EOS PUMP||149596150|
|SCUTION ROD D25 (FITTINGS 26x125) FOR 200 L DRUM||149596160|
|GRAVITY HOPPER 6L FOR EOS PUMP||151140230|
|AIR REGULATOR KIT FOR AIRMIX SPRAYING||151740200|
|Designation||Version||Suction rod||Pump filter||Hoses lenth (m)||Gun||Gun filter||Aircap||Tip||Part number|
|34F60 + XCITE 200||Wall||♦||♦||7.5 m (23 feet)||Xcite 200||♦||VX24||-||151260970|
|SERVICING KIT FOR F60 FS||144910797|
|PACK OF SEALS FOR VALVES F60||144910798|
|PACK OF SEALS FOR F60 FS||144910799|
Format : application/pdf
Size : 400Ko
Format : application/pdf
Size : 3Mo
Format : application/pdf
Size : 6Mo
Some anti-corrosion materials are available in water-based versions. These green paints have a longer dry time, but meet most environmental requirements & have excellent protective qualities.
The Anti-Corrosion Epoxy Multi-Component product is highly resistant to marine & industrial environments, buried conditions, ground water, effluents, salt water & a wide range of oils & chemicals.
Solvent-free epoxy coatings are designed for long-term protection of steel & concrete structures against corrosion, abrasion & chemical attack. Operating temperature ranges from –40F to 1040F.
A two-component efficient coating product, used as first layer on metallic surfaces & in a wide range of painting systems. Forms an excellent quality anti-corrosive polyurethane film, ensuring the adherence between the surface & the next layer of the painting process.
Anti-Corrosion Epoxy is applied for active anti-corrosive & anti-rust protection of iron & steel surfaces that are to be coated. It is extremely hard & resistant to friction. It is particularly resistant to diluted acids, alkalis, petroleum products, some solvents, water, sea water, and more.
Bitumen is an oil-based substance. It is a semi-solid hydrocarbon product produced by removing the lighter fractions (such as liquid petroleum gas, petrol & diesel) from heavy crude oil during the refining process.
Used for the steel structures of steel pipeline, steel frame, bridge & plant facilities for effective, long-term substrate protection.
Anti-fouling paint, or bottom paint, is a specialized coating applied to the hull of a ship or boat to slow the growth of sub-aquatic organisms that attach to the hull & can affect a vessel's performance & durability.
Polyurethane coatings are often used for the corrosion protection of steel because they are particularly economical to apply. They dry quickly & can therefore be over-coated in short intervals. They can also be applied independently of the weather conditions & are resistant to impact.
Chemical Agent Resistant Coating (CARC) is available in a water-based solution for environmental protection.
Chemical Agent Resistant Coating (CARC) is a paint commonly applied to military vehicles to provide protection against chemical & biological weapons. The surface of the paint is engineered to be easily decontaminated after exposure to chemical warfare & biological warfare agents. The paint is also resistant to damage & removal by decontaminating solutions.
Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.
Catalyzed polyurethane clear coats and paints are prized for their durability and versatility around the world. They are used on everything from wood cabinetry, mill work and furniture to planes, trains, and automobiles. They are usually mixed with isocyanates in the hardener. The isocyanate component of polyurethane reacts with moisture in the air and form a hard crystalline structure.
This advanced solution is delivering freshly mixed two component paint to automatic gun mounted on flatline machine.
This simple concept is delivering different color to several automatic guns with temperature management.
This solution is a concept supplying freshly mixed two-component paints & flushing solvent to one operator.
This solution is an advanced concept supplying freshly mixed two-components paint & flushing solvent to one or several manual guns.
This solution is a simple concept - with Xcite™ or Xcite™ Light Airmix® spray gun - for one or two painters. The design of the gun reduces the operator fatigue.