|Designation||Value||Unit: metric (US)|
|Maximum Fluid Pressure||96 (1392)||bar (psi)|
|Maximum Air Pressure||6 (87)||bar (psi)|
|Air Consumption||41.5 (24.4)||m³/h (cfm)|
|Weight||27 (59.5)||kg (lbs)|
|Maximum Temperature||60 (140)||°C (°F)|
|Cylinder||240 (8.11)||cc (oz)|
|Recommended Air Pressure||2 - 5 (29 - 72.5)||bar (psi)|
|Fluid Output at 30 cycles/mn||7.20 (1.9)||l/min (gal/mn)|
|Fluid Output at 20 cycles/mn||4.8 (1.27)||l/mn (gal/mn)|
|Fluid Volume Per Cycle||240 (8.12)||cc|
|Free Flow Rate||14.4 (3.8)||l/mn (gal/mn)|
|Fluid Output at 15 Cycles||3.6 0.95)||l/mn|
|Air Consumption at 30 Cycles/mn at 4 Bar (60 psi)||41.5||m³/h (cfm)|
|Displacement Per Cycle||240 (14.64)||cc (cubic inch)|
|Motor Type||2000-4 / 2000-4T|
|Air Inlet||F3/8" NPS - M3/4" NPS / F3/4" BSP|
|Fluid Outlet||M1/2" NPS / M1/2" JIC|
|Fluid Inlet||F 1" BSP / M 26 x 125|
|Number of cycles per liter of products||4|
|Sealing packing lower PEHD||♦|
|Sealing packing upper PTFE G + Polyfluid||♦|
|Wetted parts hard chrome SST, standard SST, carbide||♦|
|Designation||Version||Fluid inlet||Section rod||Drain rod||Paint filter||Air regulator||Seal||Motor||Part number|
|16C240||-||M 26x125||-||-||-||-||PEHD+ PTFEG||std||151790000|
|16C240 WALL MOUNT. PUMP W/0 FILT./SUCTION ROD.W AIR REGUL.||wall||M 26x125||-||-||-||2||PEHD+ PTFEG||std||151790100|
|16C240||wall||M 26x125||25 mm (1'')||♦||♦||2||PEHD+ PTFEG||std||151790200|
|16C240 TROLLEY MOUNTED WITH FILTER||Trolley||M 26x125||25 mm (1'')||♦||♦||2||PEHD+ PTFEG||std||151790400|
|16C240 TURBO PUMP WALL MOUNTED W/O FILTER W/O RODS||wall||M 26x125||-||-||-||2||PEHD+ PTFEG||Turbo||151797100|
|DRAIN ROD D16 S/S CONNECTOR 18X125||049596000|
|TROLLEY 2 ARMS||051221000|
|BRACKET W. STRAPS||056100199|
|SUCTION ROD DIAM 25 (FITTINGS 26*125) FOR EOS PUMP||149596150|
|SCUTION ROD D25 (FITTINGS 26x125) FOR 200 L DRUM||149596160|
|PACKAGE OF SEALS FOR FLUID SECTION C240||144970090|
|SERVICING KIT FOR HYD. C240||144970095|
|PACKAGE OF SEALS FOR 2000/4 AIR MOTOR||146270990|
|SERVICING KIT FOR MOTOR 2000-4||146270996|
Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.
Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.
A wood stain consists of a colorant suspended or dissolved in an agent or solvent. Colored, or ''stained", finishes do not penetrate the pores of the wood to any significant degree.
Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.
Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.
Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. The catalyst is moisture-sensitive and requires a Flowmax® technology protection.
Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. Curing times of AC products can be dramatically accelerated with heat application.
This simple concept is delivering different color to several automatic guns with temperature management.