The 15C50 compact Airmix® paint pump is recommended to handle all types of materials ranging from medium to low viscosity. The 15C50 Airmix® is particularly suited for 1 or 2 Airmix® gun applications and heated spray systems. Create various AIRMIX® & AIRMIX® electrostatic configurations with our large choice of accessories to meet all customer requirements.
|Designation||Value||Unit: metric (US)|
|Maximum Fluid Pressure||90 (1305)||bar (psi)|
|Maximum Air Pressure||6 (87)||bar (psi)|
|Air Consumption||3.55 (2.09)||m³/h (cfm)|
|Weight||8 (17.6)||kg (lbs)|
|Maximum Temperature||60 (140)||°C (°F)|
|Cylinder||50 (1.68)||cc (oz)|
|Weighted Sound Level||74.9||dBA|
|Recommended Air Pressure||2 - 5 (29 - 72.5)||bar (psi)|
|Fluid Output at 30 cycles/mn||1.5 (0.4)||l/min (gal/mn)|
|Fluid Output at 20 cycles/mn||1.0 (0.26)||l/mn (gal/mn)|
|Fluid Volume Per Cycle||50||cc|
|Free Flow Rate||3.0 (0.78)||l/mn (gal/mn)|
|Fluid Output at 15 Cycles||0.75 (0.2)||l/mn|
|Air Consumption at 30 Cycles/mn at 4 Bar (60 psi)||3.55||m³/h (cfm)|
|Displacement Per Cycle||50 (3.05)||cc (cubic inch)|
|Air Inlet||F3/8" BSP / F3/8" BSP|
|Fluid Outlet||F 3/8 " NPS / M1/2 JIC|
|Fluid Inlet||F 1/2 " BSP / M26x125|
|Number of cycles per liter of products||20|
|Sealing packing upper and lower GT polyethylene||♦|
|Height||58.5 (23)||cm (in)|
|Width||32 (12.6)||cm (in)|
|Depth||17 (6.69)||cm (in)|
|Wetted parts hard chrome SST, standard SST, carbide||♦|
|Designation||Fluid inlet fitting||Cartridge||Suction rod||Drain rod||Atomizing air regulator||Air regulator fluid pressure||Pump outlet filter||Part number|
|Wall mounted 15C50 F 1/2 BSP with Air plate||F 1/2''||GT||-||-||♦||♦||-||151143000|
|Wall mounted 15C50 M26x125 with Air plate||M 26x125||GT||-||-||♦||♦||-||151143050|
|Wall-mounted 15C50 with filter and rods||M 26x125||GT||Ø25||♦||♦||♦||♦||151143250|
|Wall-mounted 15C50 with filter||M 26x125||GT||-||♦||♦||♦||♦||151143450|
|Gravity hopper 6 liters||151140230|
|Easyflow suction rod Ø25 plunging tube length 600mm (for up to 60 liters drum)||149596150|
|Easyflow suction rod Ø25 plunging tube length 1000mm (for 200 liters drums)||149596160|
|Stainless steel drain rod F 18x125||049596000|
|Double post cart||151241000|
|Designation||Version||Suction rod||Hoses length||Gun||Gun filter||Aircap||Tip||Part number|
|Spraypack 15C50 + Xcite™||Wall||Ø 23 (M26x125)||7.5 m (23 feet)||Xcite™ 120||♦||VX24||-||151265050|
|Spraypack 15C50 + Xcite™||Wall||-||7.5 m (23 feet)||Xcite™ 120||♦||VX24||-||151265052|
|Spraypack 15C50 + Xcite™||Wall||Ø 23 (M26x125)||7.5 m (23 feet)||Xcite™ 120||♦||VX24||-||151265053|
|SPRAYPACK 15C50 + XCITE™ LIGHT||Wall||Ø 23 (M26x125)||7.5 m (23 feet)||Xcite™ Light 120||n the pump||VX124||12.114||151143600|
|Repair kit 420-4 air motor||144130190|
|Piston assembly & GT cartridge||144135291|
Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.
Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.
Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.
Chemical Agent Resistant Coating (CARC) is available in a water-based solution for environmental protection.
Chemical Agent Resistant Coating (CARC) is a paint commonly applied to military vehicles to provide protection against chemical & biological weapons. The surface of the paint is engineered to be easily decontaminated after exposure to chemical warfare & biological warfare agents. The paint is also resistant to damage & removal by decontaminating solutions.
Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.
Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.
Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.