04D140 Diaphragm pump
- Perfect for frequent color changes
- Reliable and durable
- Low cost of ownership
04D140 is the new pneumatic, double diaphragm pump from SAMES KREMLIN designed for low-pressure circulating systems, capable of feeding multiple guns. SAMES KREMLIN is proud to introduce the new 3.5:1 pump into our low-pressure range of pumps.
This pump benefits from a compact design making it very easy to integrate into paint systems.
Its advanced construction guarantees fast flushing making the pump perfectly adapted for fast color change systems.
|Designation||Value||Unit: metric (US)|
|Maximum Air Pressure||6 (87)||bar (psi)|
|Maximum Temperature||65 (149)||°C (°F)|
|Fluid Volume Per Cycle||140 (4.7)||cc (oz)|
|Free Flow Rate||50 (13.2)||l/mn (gal/mn)|
|Air Inlet||F 1/2'' G|
|Fluid Outlet||3/4'' BSP|
|Fluid Inlet||3/4'' BSP|
|Length||232 (9.1)||mm (in)|
|Height||251 (9.9)||mm (in)|
|Width||188 (7.4)||mm (in)|
|Weight||15 (33)||kg (lbs)|
|Suction Rod - ID 23 - Drum 200l (55gal) - F26x1.25 fitting||049596130|
|Fitting M3/4 M26x125 SST||050102445|
|Suction Rod - ID 23 - Drum 60l (5gal) - F26x1.25 fitting||149596150|
|Pneumatic valve kit for 04D140||144907024|
|Pneumatic seals kit for 04D140||144907028|
|Seals and Springs kit 04D140||144907023|
|Diaphragm kit for 04D140||144907021|
|Ball valve kit for 04D140||144907022|
Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.
Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.
Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.
Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.
Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.
Enamel paint air dries to a hard, typically glossy finish, and is used for coating surfaces that are outdoors or otherwise subject to hard wear or temperature changes.
UV-resistant epoxy systems mixed with hardener cure faster & in moist conditions.
UV coatings can be formulated up to 100% solids so that they have no volatile component that contributes to pollution.
Water-based UV coatings can be considered aesthetically equivalent to bi-component acrylic & polyurethane solvent-based coatings. The range is composed of both pigmented & transparent products.
UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.
The UV polyurethane multi-components are especially designed for very strong UV stability. Mixing with hardener gives very high durability & UV resistance.
The UV polyurethanes are especially designed for UV stability, The coating is long lasting, offers excellent substrate protection, provides an attractive finish & is user-friendly.
Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.
Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.
Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.
Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.
Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. The catalyst is moisture-sensitive and requires a Flowmax® technology protection.
Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. Curing times of AC products can be dramatically accelerated with heat application.
The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.
Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.
A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.
Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.